Bethel, CT U.S.A., March 26, 2019: During last week’s ANTEC® 2019 plastics technical conference in Detroit, MI, SPE-Inspiring Plastics Professionals honored plastic products that meet the ultimate test of value by making our lives better in some way.
The annual ANTEC® is SPE’s largest event and the world’s leading plastics technical conference. A panel of judges selected the winners of the 6th annual Plastics for Life™ Global Parts Competition from among a wide range of parts that had already won in competitions at previous SPE events during the past year. In addition, a People’s Choice award was presented to the part that received the greatest number of votes from ANTEC® attendees.
The award categories and winners are:
GRAND PRIZE: 2019 Sierra LD Thick Light Bar
This application incorporates a new high transparency LED2245 PC used in a thick light bar to allow a sculptured ice appearance that meets a legal Daytime Running Lamp function in an automotive headlamp. The novel light-pipe design incorporates non-standard multi-shot thick molding, tooling and process to provide unique styling and function. This part required the development of a proprietary
multi-shot molding process to produce a low stress PC thick light bar with high clarity and minimal material shrink and warpage. Due to the large complex shape of the part, the tooling required a modified surface and special ejection design to properly eject the thick
light bar. To meet the color and optical clarity required by the product design, the resin was manufactured in a different process method than standard PC to provide very high optical clarity in extremely thick cross-sections. This new PC material from Covestro provided
crystal color development to reduce yellowness in typical thick PC parts in the un-lit state. Enhanced CAE tools were required for the complex part and tooling design.
Competition Winner: 2018 SPE Automotive Division Innovation Awards Gala, Quality of Life Category
PEOPLE’S CHOICE: Brewcraft’s Genesis 6 Gallon Carboy Fermenter Features include:
• Designed to replace glass carboys, which can break when dropped producing sharp glass and lost product and have narrow necks making it hard to clean
• Natural HDPE allows for product to be seen through plastic for graduation readings
• Clearly legible embossed graduations in both standard and metric volumes
• Integrated needle blown handles provide strength and rigidity through unique pinch off design for carrying full carboy while not compromising comfortable grip
• Wide neck opening for use of brewing equipment and aid in cleaning
• Smooth land to provide great seal which is critical in brewing process
• Inside of carboy is smooth and free of any voids or crevasses which could house bacteria, especially where the handles meet the carboy which allows for cleaning after the brewing process is completed
• Chamfered base designed to allow carboy to tilt at an angle to siphon last bits of product out of container
• Embossed company name and made in USA logo
Competition Winner: SPE 34th Annual Blow Molding Conference, Industrial Category Award, Quality of Life Category
IMPROVING LIFE: ThermaPANEL
ThermaPANEL is a highly efficient modular hydronic heat exchange system used for radiant heating and cooling applications. The patented turbulent flow channel design transfer 250% more energy than traditional heat exchange systems with laminar flow properties. Panels are formed and tested to be capable of holding pressure up to 50 PSI at temperatures of up to 145° F. Individual panels are interconnected using plastic pipe in a secondary process that fusion welds the panels together using extruded PE-RT pipe. The fusion welding process reduces the amount of mechanical unions or joints needed during system installation, reducing both labor and materials cost for contractors and the opportunity for mechanical joints to fail. Each ThermaPANEL unit is individually insulated in a secondary process using EPS of varying density depending on the load requirements of the application.
Competition Winner: 2018 SPE Thermoforming Conference Gold Award for Heavy-Gauge Twin Sheet Division, Quality of Life Category
PROTECTING LIFE: Integrated Tire Carrier, Rear Camera & Brake Light Assembly on 2018 Jeep Wrangler
This hybrid composite technology utilizes magnesium injection molding for higher structural strength with reduced weight and polymer over molding for improved impact and corrosion resistance. A 60% weight savings is achieved compared to metal stamping and a
20% weight savings is achieved compared to die casting processing methods. A cost savings of 20% is achieved with an improved load rating from 85 lbs. to 115 lbs. The new design eliminates the need for a steel bracket for an indirect cost savings. The system makes is
easier for consumer to remove and install spare tire and contributes to a reduction in noise transmission and improved impact resistance due to polymer/mg composite system.
Competition Winner: 2018 SPE Automotive Division Innovation Awards Gala, Sustaining Life Category
Quality of Life: Pickup Tuck (above image)
Lightweight & portable cargo organization system for the bed of a pickup truck. Product installs/un-installs in the bed of your truck in minutes, without the need of any tools, creating a temporary and secure “trunk” for your truck. Completely folds together and stores
behind the seats when not wanted or needed.
• Product Features:
• Installs and uninstalls in minutes with no tools required.
• Folds and stores behind seats when not wanted or needed.
• Light weight (weighs less than 30 lbs.)
• Secures items from sliding around in the bed of your truck and keeps them accessible
near the tailgate.
• Water Resistant – provides some protection to items inside the compartment.
• Accommodates pickups with and without bedliners or covers.
• Design Features:
• Unique, patent-pending features were adapted across the whole product to minimize
additional components and reduce labor costs.
o Integral snap-on single molded in hinge between back to side panels.
o Integral twist-on combined with snap-detents multi hinges between both back
panels
o Integral twist-on multi hinges housing metal tubing structure through both top
panels
• The part design is engineered with exact cavity tooling to mold either side panel and
either back panel. (i.e. the tooling configuration replaces left and right parts with a
universal part.)
• Molded in strap pocket (side panel), accessory pockets (side panel), snap-lock latches
(top panel) and designed detent for the strut (back panel) to minimize:
o Metal hardware
o Additional components
o Labor costs
o Recycling waste
Competition Winner: SPE 34th Annual Blow Molding Conference Industrial Division Award Industrial Category Award Auto/Trans People’s Choice Award – Industrial, Quality of Life Category
SUSTAINING LIFE: Simply Orange Bottle in Clear EBM PET 89 oz. Simply Orange Juice bottle designed from the high performance PolyclearTM EBM PET 5507. Manufactured by Indorama Ventures with the collaboration with Coca-Cola and CKS Packaging.
Part Features / Benefits:
• Lightweighted part- Reduction of the overall weight from previous container, made of PETG.
• 100% recyclable compared to the non-recyclable PETG.
• High gloss – Met or exceeded OEM requirements for clarity and gloss.
• High Impact resistance – Met or exceeded OEM requirements for drop impact.
To read more about SPE-Inspiring Plastics Professionals and other winners: “Click Here”
For more information, please “Click Here”
