Condition Monitoring for Hydraulic Oil and Hydraulic Pumps

Condition Monitoring for Hydraulic Oil and Hydraulic PumpsCondition monitoring for hydraulic oil and hydraulic pumps. The challenge in maintaining and repairing injection moulding machines is to guarantee high availability while at the same time reducing costs. This is where e-connect.monitor from ENGEL comes in. Please read the story through the ENGEL press release.

The challenge in maintaining and repairing injection moulding machines is to guarantee high availability while at the same time reducing costs. This is where e-connect.monitor from ENGEL comes in. The condition monitoring solution makes it possible to check the condition of process-critical machine components during operation and reliably predict their remaining service life. In this way, unplanned downtimes can be avoided and the working life of the components fully utilised. ENGEL is successively expanding its condition monitoring range. Following the successful introduction of two modules for plasticising screws and spindles two years ago, ENGEL will be presenting two further modules for permanent monitoring of hydraulic oil and hydraulic pumps at Fakuma 2018, from 16 to 20 October in Friedrichshafen, Germany.

Oil quality permanently transparent

With increasing operating time, the water content and the particle concentration in the hydraulic oil increase and can lead to wear or failure of the hydraulic components. Chemical oil ageing is another factor that makes it necessary to check the hydraulic oil regularly. e connect.monitor by ENGEL now makes it possible to monitor the quality of the hydraulic oil online with the aid of sensors in the oil circuit. This eliminates the need for time consuming, manual oil checks. The user receives recommendations on filtration time and duration and is able to precisely plan the oil change based on the current condition of the oil. Monitoring oil quality also ensures early detection of critical conditions and thus averts damage and unplanned failures.

The pertinent test data is recorded during ongoing production, transmitted to ENGEL via a secure data connection, and automatically evaluated and interpreted there using specially developed mathematical models. The results are immediately visible in the ENGEL customer portal e-connect. ENGEL at Fakuma 2018: hall A5, stand 5204.

Full Document: ENGEL Presents E-Connect Monitoring at FAKUMA 2018

To read the whole document, receive the PDF File, and the links, refer to the article above for which you should be a PRO-MEMBER.

***************************
Keeping an independent media in countries that impose limitations with a paid subscription, will help to support the humankind’s freedom. If you believe it please act to be a PRO-MEMBER by clicking “HERE“, or:

Condition Monitoring for Hydraulic Oil and Hydraulic Pumps
Tagged on:                 

Leave a Reply

Your email address will not be published. Required fields are marked *

*

}